Arduino is an open-source, programmable microcontroller and software on the basis of the ATMega chip. Even though Arduino was created as a prototyping platform, it can be utilized in various electronics arduino maroc projects whether temporary or embedded. The Arduino board could be programmed using the Arduino software. The syntax because of this is similar to C/C++ and Java. It was created to be simple and simple to use, and could be operated by anyone, from beginners to experts alike.
As Arduino is an open source platform, you will get hold of the origin code and schematics for it. This means you can delve as far into it as you need, even creating your own personal Arduino boards. There is also a large community behind it, and you’ll find many tutorials and projects from throughout the world online.
What can I do with an Arduino?
Pretty much anything you need! It has been found in a wide variety of ways while the choices are virtually unlimited. Past projects have included robots, art installations, in-car computers, MIDI controllers, cocktail makers, human-computer interfaces, Facebook’like’counters, advertising displays, clocks, music instrument, custom mouse and keyboard, home automation… The list continues on and on!
The main top features of an Arduino board are it’s ability to see data from sensors, to send and receive digital signals and can connect via serial to your computer. You are able to control many things, from LEDs and LCDs, to motors and relays. You can even read values from sensors such as for example potentiometers, light dependent resistors (LDRs) and piezos.
The digital pins on an Arduino allow you to read or write 5v values. You can use a flag to switch on an LED (with a resistor). You are able to send a signal to an exchange to operate higher voltage appliances like televisions and house lights. You are able to send messages to motors to switch on and off. You are able to check to see if your button has been pressed. You may also send and receive serial data, parallel data and digital pulse width modulation. Basically anything that may be controlled via a little current could be used.
The analog pins allow you to read an incoming voltage between 0v and 5v. This is how you read from sensors. There are a multitude of sensors available, from simple hands-on pressure sensors and rotary potentiometers, to environment sensors such as for example pressure, gas, temperature and even alcohol. When you have, like, a slider set to exactly 50% of its range, it will output a voltage of 2.5v. The Arduino may then read this and use the value to regulate something else.
You don’t have to avoid with only controlling electronic circuits. You are able to send data back again to the computer to regulate software such as for example Processing and Max/MSP. You are able to send the data over USB with most models. Some models have Bluetooth and Ethernet ports, and with an additional shields (like an add-on unit) you can communicate via WiFi and other protocols.
What can’t I do with one?
The Arduino doesn’t have plenty of processing power, so pretty much any major intensive task is out from the question. You won’t have the ability to process, record or output video or audio (Although you can output graphics to TFT or LCD screens). It is not like a computer. You won’t have the ability to connect your webcam or keyboard to it. There is no operating system with a GUI (like a Raspberry Pi). It is a very different beast.
Can anybody play one?
That’s the beauty of it. Even though you haven’t any knowledge or experience with electronics or programming, you will get a straightforward project up and running in one hour or two. Getting an LED to flash on and off in a design is as simple as adding an LED and resistor to a breadboard, connecting a couple of wires and writing a couple of lines of code. Arduinos are found in classrooms throughout the world as a starter to programming and electronics.